ford part number

[Hinesight]

Just bought the mk4 kit and will be using 351w. does anyone know what the part number for the 302/351 bellhousing is? I will be using a tremec tko 600 transmission

[edwardb]

Looks like this one from Ford Racing: M-6392-R58 http://www.cjponyparts.com/tremec-bellhousing-289-302-351w-1965-1995/p/M6392R58/

Depending on the power, how you're going to use your car, etc., many upgrade to a steel aftermarket bell, like the Quick Time RM6060 or RM6065 (SFI Approved).

[carbon fiber]

I've got the Lakewood steel bellhousing/scattershield with a 351w/tremec. very happy with it.

[CDXXVII]

Quick Time part numbers below are correct. However, If you go with the RM-6065 ( SFI ) you will most likely have to trim the bottom to avoid hitting anything on the road over 3" tall. If you don't plan on racing stick with the RM-6060. If you cut the RM 6065 you will void the SFI rating and just have a heavier and more expensive bell housing.


Quick Time RM6060 or RM6065 (SFI Approved)

[edwardb]

Quick Time part numbers below are correct. However, If you go with the RM-6065 ( SFI ) you will most likely have to trim the bottom to avoid hitting anything on the road over 3" tall. If you don't plan on racing stick with the RM-6060. If you cut the RM 6065 you will void the SFI rating and just have a heavier and more expensive bell housing. Quick Time RM6060 or RM6065 (SFI Approved)

Exactly. Should have pointed that out. That's why my Mk4 build is getting the RM6060. Nice piece.

[SCFFR]

x2 on the Quick Time RM6060. Fit perfectly on my 410W and TKO-600 with no clearance issues.

19696

[Hinesight]

Thanks that helps a lot