pictures of donor parts that are needed

[mspice]

If any of you have already parted out your donor car, is there any way you could take a picture of each part and exactly what is needed? Since I'm a complete newbie when it comes to car mechanics, its not obvious to me. For the same reason, I decided to buy just the donor parts instead of parting out a donor myself. I want to double check and make sure I have exactly what I need.

Here is what is listed on the main kit page:

• Front spindles with full brakes and front lower control arms
• Rear spindles with brakes and e-brake handle/cables
• Steering rack, tie rod ends, and upper steering column assembly
• Pedal box and throttle pedal
• Master cylinder and brake booster, and clutch master cylinder
• Engine with turbo and intercooler (if WRX model)
• Exhaust manifolds, O2 sensors, and down tube
• Transmission
• Rear lower control arms, toe links, and CV joints
• Front seats, front seat belts, and gauge pod
• Fuel pump
• Radiator
• Wheels and tires
• Door hinges, front w/ latches,strikers, and inside door handles
• Side view mirrors, left and right
• Rear view mirror
• Rear seat belts

Thanks in advance!

[Bkafe]

If any of you have already parted out your donor car, is there any way you could take a picture of each part and exactly what is needed? Since I'm a complete newbie when it comes to car mechanics, its not obvious to me. For the same reason, I decided to buy just the donor parts instead of parting out a donor myself. I want to double check and make sure I have exactly what I need.

Here is what is listed on the main kit page:

• Front spindles with full brakes and front lower control arms
• Rear spindles with brakes and e-brake handle/cables
• Steering rack, tie rod ends, and upper steering column assembly
• Pedal box and throttle pedal
• Master cylinder and brake booster, and clutch master cylinder
• Engine with turbo and intercooler (if WRX model)
• Exhaust manifolds, O2 sensors, and down tube
• Transmission
• Rear lower control arms, toe links, and CV joints
• Front seats, front seat belts, and gauge pod
• Fuel pump
• Radiator
• Wheels and tires
• Door hinges, front w/ latches,strikers, and inside door handles
• Side view mirrors, left and right
• Rear view mirror
• Rear seat belts

Thanks in advance!

Also being a newbie... I planned on capturing pics for each donor part.
Will be in my build thread...

[wleehendrick]

FYI... the 'what you need' list on the website has not been updated. You should refer to the 818 Disassembly Instructions (http://thefactoryfiveforum.com/showthread.php?10394-818-Assembly-Manual-Download-the-Donor-Disassembly-Section!&p=102561&viewfull=1#post102561)until the full manual is released.

[metalmaker12]

Go on my build threads

[mspice]

@wleehendrick , thanks for the fantastic tip! I poured over this today and learned a lot.

@metalmaker12, do you have a 818 build thread yet? I couldn't find it. Perhaps you meant other builds that you've done?

Here is the checklist in the disassembly manual with some pictures from my donor parts inserted. I certainly could be wrong about some of them. Please comment on any errors that you see. The items with '?' next to them are ones that I don't know what they look like.

http://spiceland.org/subaru%20parts/checklist.html