SN-95 Spindle Question

[haroldd1963]

Can anyone tell me if the Spindles from a 94-95 SN-95 Mustang are the same for the V6 and GT? What about the Rotors and Calipers? I found some on a V6 car that I can get for not a lot of money. Thanks.

[michael everson]

Spindles are definetly the same. Pretty sure the brakes are too.
Mike

[skullandbones]

Yeah. The V6, GT, and Cobras are the same but I think the Cobras are larger rotors and brakes. The spindles are 5mm wider per side for the 94-95 than Fox and the 96 and up are 8mm wider. I've been reading about upgrading the front suspension. Lots of folks have commented on how the V6 parts are usually cheaper at the salvage yard so they buy those for the upgrade. Same stuff! Go figure. Good luck on your search. WEK.

[68GT500MAN]

I too am pretty sure that they are the same.
Doug

[2FAST4U]

http://www.maximummotorsports.com/store/index.php?main_page=tech_front_susp_7993to9604_spi ndle

[haroldd1963]

Thanks for the quick replies! That's what makes this forum the best.

[Mike N]

I bought '95 V6 spindles and added the Ford Cobra brake package along with new hubs/bearings. The larger rotors and calipers bolt on with no modifications except for throwing away the small diameter brake disc backing plate.