i'm 6'5 will I fit?

[supergoji]

I am looking for a nice project for myself and my father to complete we are 6'4 and 6'5 im 220 and he's a little bit lighter than me. Just curious if we can fit in this monster.

[Roger Reid]

You probably can. My suggestions are to (as much as I dislike 20" wheels) use 20" wheels. Then raise the ride height to 7" (frame to ground) and lower the seat pan. Bodywork on the sides below the door can cover the lowered floorpan and resore the origional look of the grounclearance. Use a recovered Kirky aluminum seat mounted right on the floorpan.

[GTM RACER]

PDG has drivers that range from 5'-6" to 6'-5". They had to use a Gurney type bubble on the roof. Works fine for them and not that intrusive on the body design.

[supergoji]

Ok thanks guys.

[crash]

As one of the drivers of the PDG GTM, and 6'3", anything can be done, but I would HIGHLY recommend that you speak with, and visit, someone who has fit someone of your size into a GTM. Bottom line is that the GTM was not designed for tall people. It can be made to work, and work well, but you really need to see it in person and talk to the people that have done it because it won't be a straight yes or no answer. It depends a lot on how one is proportioned.