Visit our community sponsor
The switch and gauge panel is finally done. The last switch actuator finally arrived after the USPS lost the first shipment. I had to add turn signal indicators since the motorcycle turn signal box I'm using won't play nice with the RacePak display. The turn signal control box illuminates the turn signals to approximately half normal intensity anytime there is power to the box. This turns the signals into daytime running lights and it's a function that cannot be turned off. That's enough voltage that the RacePak signal indicators pick it up and start flashing continuously. So the fix that makes the most sense is to simply add LED indicators on the switch & gauge panel and disconnect the RacePak from the turn signal box.
- Photo Added
- 11-06-2017, 07:11 PM
- Album
- Bad to the Bone 33HR
- Added by
- NAZ
Visit our community sponsor
